Grayline Program
A Grayline program comes with the N1MM logger software package.
It is included in the N1MM-Fullinstaller installation program. You may
install the Grayline program at any time, during initial installation
or later. N1MM logger is not installed on your computer in order to use
the Grayline program. The logging program does not need to be
running to use it. You may start the program from the Window menu in
the N1MM logger main program.
- Grayline contrast
-
- A dialog will open and with sliders
the Sunset and Darkness can be adjusted. A test button is
available to check the settings.
- Show my
Location - Will show a red dot on your
location.
-
- The location as set in the N1MM logger main program is
being used (Config | Change Your Station data| Latitude
& Longitude).
- Show Meridian Lines
- Show the meridian lines on the Grayline map.
- Sun
-
- Show Sun -
Select or de-select showing the current position of the sun
on the Grayline map.
- Small sun -
Show a small sun.
- Medium Sun -
Show a medium sun.
- Large Sun -
Show a large sun.
- Twilight
terminator- the width of the gray line in degrees.
-
- Civil terminator - 6º
- Nautic terminator - 12º
- Astronomical terminator - 18º
